Fujitsu RX600 manual Modules with Electrostatic-Sensitive Devices, ESD label

Important information Safety instructions

Modules with Electrostatic-Sensitive Devices

Modules with electrostatic-sensitive devices are identified by the following sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the following points:

●Switch off the system and remove the power plugs from the power outlets before installing or removing components with ESDs.

●You must always discharge static build-up (e.g. by touching a grounded object) before working with such components.

●Any devices or tools that are used must be free of electrostatic charge.

●Wear a suitable grounding cable that connects you to the external chassis of the system unit.

●Always hold components with ESDs at the edges or at the points marked green (touch points).

●Do not touch any connectors or conduction paths on an ESD.

●Place all the components on a pad which is free of electrostatic charge.

IFor a detailed description of how to handle ESD components, see the relevant European or international standards (EN 61340-5-1, ANSI/ESD S20.20).

RX600 S4 Operating manual 29