CSS components

Hot-plug components

2 1

3

Figure 31: Deactivating, unlocking and removing the board

ÊDeactivate the expansion card using either the relevant PCI hot-plug software or by pressing the optical waveguide (1).

ÊWait until the optical waveguide (1) no longer lights up. The slot is now zero potential.

ÊIf necessary, remove all cables from the expansion card.

ÊOpen the expansion card lock by lifting it up (2). The expansion card is now mechanically unlocked.

ÊHold the removal tool by the green handle and pull it out of the PCI slot together with the expansion card (3).

IDo not pull on the expansion card itself.

RX600 S4

Operating manual

99

Page 99
Image 99
Fujitsu RX600 manual Deactivating, unlocking and removing the board