Hardware installation | Rack installation/removal of server |
4.2.1Mounting in the PRIMECENTER Rack
For mounting the server in the PRIMECENTER Rack the following parts are necessary:
–a support bracket with two M5x10 screws including centering disks
–a rack mount kit, comprising two telescopic rails (left/right), completely mounted
–eight M5 centering fasteners (two each for front and rear, two each left and right)
IYou can find general information regarding server installation in the rack in the technical manual for the PRIMECENTER rack.
When mounting the left telescopic rail in the PRIMECENTER Rack, the supplied support bracket must first be mounted on the rear left support upright.
2
1
Figure 3: Mounting the support bracket to the left rear support upright
ÊPosition the support bracket at the corresponding height on the rear left support upright (1).
Place the knobs in the corresponding holes.
ÊFasten the support bracket with the two supplied centering fasteners M5 (2).
RX600 S4 | Operating manual | 43 |
