Fujitsu RX600 manual Switching the server on and off, Starting up for the first time

Starting up and operation Switching the server on and off

5.2Switching the server on and off

VCAUTION!

It nothing appears on the screen but flickering stripes after switching on the server, switch the server off immediately (see chapter “Trouble- shooting and tips” on page 75).

The On/Off button does not disconnect the server from the mains. To completely disconnect it from the mains voltage, remove the power plugs from the sockets.

Switching the server on

The power-on indicator at the front does not light up (item 6 in figure 13 on page 55). The power indicator on the power supply units lights up if the server is connected to the mains (item 3 in figure 21 on page 66).

–Starting up for the first time:

ÊPress the On/Off button (item 9 in figure 13 on page 55). Power-on indicator lights up green.

ÊInsert ServerStart disc 1 in the DVD drive.

ÊFollow the on-screen instructions (see also section “Configuration with ServerStart” on page 70 or section “Configuration without ServerStart” on page 71).

–System already installed:

ÊPress the On/Off button (item 9 in figure 13 on page 55). Power-on indicator lights up green.

The server is switched on, performs a system test and boots the operating system.

RX600 S4 Operating manual 67