Starting up and operation | Cleaning the server |
5.3.3Configuration without ServerStart
Configuring onboard SAS RAID controller
Configure the controller as described in section “Configuring onboard SAS RAID controller” on page 69.
Installing the operating system
ÊInsert the CD for the operating system you want to install.
ÊReboot the server.
ÊFollow the instructions on screen and in the manual for the operating system.
If your server is equipped with a RAID controller, please read how to install the desired operating system in the related manual.
5.4Cleaning the server
VCAUTION!
Switch the server off and disconnect the power plugs from the grounded shockproof sockets.
Do not clean any interior parts yourself; leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in a mild domestic detergent and then carefully wrung out.
RX600 S4 | Operating manual | 71 |
