Configuring the server | Starting up and operation |
5.3.2Configuration with ServerStart
The ServerStart disc 1 supplied allows you to conveniently configure the server and install the operating system.
The ServerStart advantages
–Automatic configuration of your server’s hardware and disk arrays.
–Installation assistance for all leading server operating systems.
–Creation of configuration files for unattended installation of several PRIMERGY servers with identical hardware configurations.
–Installation of drivers and additional software.
IThe software that can be installed depends on your server’s hardware configuration. This configuration is detected automatically.
IDescriptions of operating systems not covered in the RAID controller manual are provided in the corresponding readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the associated manual.
If you are using ServerStart, you can skip the following section on how to configure the server and install the operating system. Continue from section “Cleaning the server” on page 71.
70 | Operating manual | RX600 S4 |
