| CSS components |
Removing expansion card from the removal tool
VCAUTION!
When removing the expansion card from the removal tool, pay particular attention to the engaging hooks that fasten the board to the removal tool (see figure 32 on page 100). Do not lift them by more than approx. 1 mm, in other words only as far until the expansion card is released. Otherwise you could damage the engaging hooks.
1 1
2
Figure 32: Removing the expansion card from the removal tool
ÊLift the green movable engaging hooks no more than approx. 1 mm (1) until the expansion card is completely released.
ÊTake the expansion card out (2) and put it aside.
100 | Operating manual | RX600 S4 |
