![](/images/new-backgrounds/1312344/31234495x1.webp)
Rack installation/removal of serverHardware installation
1 | 1 |
Figure 7: Securing the server
ÊPlace the cage nuts for fastening the front panel in the corresponding holes of the front support uprights and fasten the server using two knurled screws (1).
To remove the server, follow this procedure in reverse. When removing the server, make sure that the two system support rods (see figure 5 on page 46) are pulled out parallel right and left.
48 | Operating manual | RX600 S4 |