![](/images/new-backgrounds/1312344/31234491x1.webp)
Rack installation/removal of server | Hardware installation |
4.2.4Inserting the server
VCAUTION!
At least two people are needed to position the server in the rack.
ÊFully extend the fitted telescopic rails. They must click into place so that they can no longer be moved.
Figure 5: Inserting the server
ÊLift the server onto the right and left system support rod and press it into the corresponding recesses on the upper edges of both system support rods with the three screw fasteners right and left.
46 | Operating manual | RX600 S4 |