CSS components

Hot-plug components

8.1.4Hot-plug hard disk drives

Up to eight hot-plug hard disk drives can be installed in the PRIMERGY RX600 S4 Server.

The hard disk drives which can be ordered for the PRIMERGY RX600 S4 are supplied already mounted in an installation frame so that defective hard disk drives can be replaced and new drives can be added during operation. The hard disk drive and installation frame together make up the HDD module.

VCAUTION!

The hard disk drive must not be removed from the installation frame by anyone except a service technician.

The HDD modules (drives) must all be marked clearly so that they can be put back in their original places after an upgrade. If this is not done, existing data can be lost.

The hot-plug function is only possible in conjunction with a corre- sponding RAID configuration.

Further information about the RAID configuration or RAID level can be found in the RAID controller documentation.

RX600 S4

Operating manual

89

Page 89
Image 89
Fujitsu RX600 manual Hot-plug hard disk drives