![](/images/new-backgrounds/1312344/312344119x1.webp)
Controls and indicators | Starting up and operation |
5.1.1.4Indicators on the HDD modules
1
2
Figure 15: Indicators on an HDD module
1HDD BUSY (green)
–Lights up: HDD in active phase
–Does not light: HDD inactive (drive inactive)
2HDD FAULT (orange)
–Does not light: no HDD error
–Lights up: HDD Faulty or Rebuild Stopped (drive defective/needs replacing, a rebuild process was stopped or the HDD module is not correctly inserted)
–Slow flashing: HDD Rebuild (the data is being restored after changing a drive)
–Fast flashing: HDD Identify
–Four fast blinks/pause: HDD Predicted Fault (probable drive error)
–Two fast flashes/pause: HDD Hot Spare
If a hard disk drive continuously indicates an error, the drive should be replaced as soon as possible. This can be done during operation (see
60 | Operating manual | RX600 S4 |