Panasonic NA-F90H2 operating instructions Soak Course, Air Dry Course, Time required

Soak Course

This process to wash heavily soiled laundry.

				1
				3
				2
Remarks : The laundry will be soaked for an hour after feeding water.
1	Press the [Power On] button and put in the laundry.
2	Press the [Program] button 5 times for	• The light will indicate “Soak’’ Course.
	selecting “Soak” Course.	• The process time selection can be selected such as
		below.
		1. Wash: Any selection is possible
		2. Rinse: Any selection is possible
		3. Spin: Any selection is possible
3	Press the [Start/Pause] button.	• The machine will measure the load size without water
		(laundry sensing).
			«�
		• The water level will be indicated automatically.
		• You can adjust the water level according to your
		desired level.
4	Put in the appropriate amount of detergent	• Different brands of detergent may have different
	into the detergent drawer for the water level.	measuring scoops sizes. If the scoop holds
	Then close the lid.	other than 40 grams, add the amount of detergent
		recommended by the detergent makers for the
	After Soaking process is completed, it will	selected water level. See page 6 for details.
	automatically continue with “Normal” Course.	• Water may not be supplied if the lid is open,
	7 Add softener. See page 7 for details.	depending on the setting of a water level.

The buzzer lets you know when the washing is finished.

Air Dry Course

The air dry is the process to provide air flow utilizing the rotation of the tub and dry the laundry with this air flow. (Agitation is performed about every 30 minutes to untangle the laundry.)

Flashing in operation

1

3

2

Remark: • The laundry may not be dry enough depending on the size of the load, type of clothes, temperature, humidity and installation conditions of the washing machine. (As no heater is used for this function, some users may feel the laundry is cold and not dry.)

•Clothes for which the air dry function may be used - synthetic clothes (2.0kg).

1 Untangle the spun laundry and place them in the tub. Securely close the lid, and then, press the [Power On] button.

2	Press the [Air Dry] button to select the	•	“90 min” will be displayed as the default.
	time required.	•	You can select from “30 min” and “60 min” also.

3Press the [Start/Pause] button.

•The air dry operation is a timer-controlled program and it completes regardless of how dry the laundry is. If the laundry is not dry enough, perform the air dry operation one more time.

The buzzer lets you know when the Air Dry is finished.

14

NA-F90H2_EN_AR-PE-V2.indd 14

11/23/11 3:41:34 PM