Panasonic WSLS1100, WSLP1100, WSLM1100 owner manual Secure the drain hose to the sink or stand pipe

Page 16

Installation Instructions

WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—TWO-FAUCET CONNECTIONS

If you have two separate water connections, your washer can be connected to both the hot and cold water faucets. This kit can be purchased from your dealer or from Parts and Accessories. In the United States, call 800.626.2002. In Canada, consult the yellow pages for your local Camco number.

TO CONNECT THE WASHER:

1 CONNECT TO WATER LINE

Connect HOT and COLD water inlet hoses to the HOT and COLD faucets.

2CONNECT DRAIN HOSE

Secure the drain hose to the sink or stand pipe.

Cable

Tie

Cable Tie

Sink	Stand Pipe

3PLUG THE POWER CORD INTO A 3-PRONG GROUNDED OUTLET

Insure proper ground exists before use

4INSTALLATION CHECKLIST

Before starting the washer, check to make sure:

❏Main power is turned on.

❏The washer is plugged in.

❏The water faucets are turned on.

❏The unit is level.

❏The drain hose is properly tied up.

❏There are no leaks at the faucet, drain line or washer.

TO DISCONNECT THE WASHER:

1 TURN WATER FAUCETS OFF

2 UNPLUG POWER CORD AND RETURN IT TO THE STORAGE AREA

3DISCONNECT THE DRAIN AND WATER SUPPLY HOSES

Hang them on the storage rack.

16

Image 16

Contents Washers Your Laundry Area When not in USE Special washer features To cleanTo Use the Detergent Dispenser To Use the Fabric Softener DispenserTo Use Automatic One-Touch Washing About the control and indicator settingsTo Choose Your Own Cycle Selections START/PAUSE Loading and using the washer Care and Cleaning of the WasherSorting Wash Loads Proper Use of DetergentFabric Care Labels Machine wash CycleRack Installation Washer LocationPlumbing Parts SuppliedGrounding Instructions Electrical RequirementsPush the Leveling Locks Back Plug the Power Cord Into a Grounded Outlet Flush Water LinesConnect to Water Lines Connect Drain HoseRUN the Washer Through a Complete Cycle Installation ChecklistRead the Rest of this Connect to Water Line Tighten ConnectorConnect to Valve Inlet Make Sure the Temperature Selector is SET AT COLD/COLD Disconnect from Water Line Drain WaterSecure the drain hose to the sink or stand pipe Before you call for service… Status IndicatorsWater temperature Too many sudsWater leaks Is incorrectWasher won’t operate Colored spotsGrayed or yellowed ClothesPeel off cleanly Performance cont’dOr excessive wear WrinklingWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration One Year Five YearsSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio