AEG L64850L, LAVAMAT 64850L user manual Cleaning the water inlet filters

Page 22

Care and cleaning 21

6. When no more water comes out, un- screw the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

7.Remove any objects from the pump impeller by rotating it.

8. Put the cap back on the emergency emp- tying hose and place the latter back in its seat.

9.Screw the pump fully in.

10.Close the pump door.

WARNING!

When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

If the appliance doesn't fill, takes long to fill water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked .

To clean the water inlet filters:

Image 22

Contents User’s Manual Lavamat 64850L Contents Installation Safety informationGeneral safety Safety informationChild Safety UseProduct description Control panel Control panel Drain pump Adjustable feetDetergent dispenser drawer Display Duration of selected programmeChild safety lock Indicator pilot lightsAcoustic signals PersonalizationMeasure out the detergent and the fabric softener Daily useLoad the laundry Daily useProgramme option buttons Select the desired Temperature ButtonSelect the Spin speed or the Rinse Hold option Button Relevant light will light upSelect the Sensitive option Button Select the Delay Start ButtonSelect the Stain option Button Select the Time Saving option ButtonAltering an option or a running programme Cancelling a programmeSelect an additional rinse Extra Rinse Interrupting a programmeAt the end of the programme Helpful hints and tipsOpening the door after the programme has started Sorting out the laundryDetergents and additives Removing stainsHelpful hints and tips Degrees of water hardness Washing programmesQuantity of detergent to be used Washing programmesMain wash Rinses Short spin at 1200 rpm Main wash Rinses Long spin at 1200 rpm Max. load 3,5 kgRinse option will be activated automatically Max. load 3,5 kg Reduced load 2 kgMax. load 7 kg Wool / Handwash Max. load 2 kgRinses Short spin at 1200 rpm Relevant buttonCare and cleaning Care and cleaningMaintenance wash DescalingExternal cleaning Washing drumDoor seal Drain pumpCleaning the water inlet filters Emergency emptying out Turn on the water tapFrost precautions What to do if…Clean the drain filter What to do if…Reduce the detergent quantity or use anoth- er one Replace it with a new oneWhite Cottons Consumption valuesConsumption values Programme 60Unpacking Technical dataInstallation Cottons Synthetics DelicatesInstallation Unscrew the three boltsInstallation Slide out the relevant plastic spacers Positioning and levelling Water inletWater drainage End of the drain hose can be positioned in three waysPackaging materials Electrical connectionEnvironment concerns Ecological hintsPage Warranty Showroom