AEG LAVAMAT 64850L, L64850L user manual Positioning and levelling, Water inlet

Page 31

30Installation

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine

is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar

materials under the machine. If it is impossible to avoid positioning the machine next to a gas cooker or coalburning stove, an in-

sulating panel covered with aluminium foil on the

side facing the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0°C. The water inlet hose and the drain hose must not be kinked.

Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

This appliance must be connected to a cold water supply.

1. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance.

Do not use the hose from your previ- ous machine to connect to the water supply.

2. The other end of the inlet hose which connects to the machine can be turned as showed in the picture.

Do not place the inlet hose down- wards. Angle the hose to the left or right depending on the position of your water tap.

3.Set the hose correctly by loosening the ring nut. After positioning the inlet hose,

Image 31

Contents User’s Manual Lavamat 64850L Contents Safety information Safety informationGeneral safety InstallationUse Child SafetyProduct description Control panel Control panel Drain pump Adjustable feetDetergent dispenser drawer Duration of selected programme DisplayPersonalization Indicator pilot lightsAcoustic signals Child safety lockDaily use Daily useLoad the laundry Measure out the detergent and the fabric softenerRelevant light will light up Select the desired Temperature ButtonSelect the Spin speed or the Rinse Hold option Button Programme option buttonsSelect the Time Saving option Button Select the Delay Start ButtonSelect the Stain option Button Select the Sensitive option ButtonInterrupting a programme Cancelling a programmeSelect an additional rinse Extra Rinse Altering an option or a running programmeSorting out the laundry Helpful hints and tipsOpening the door after the programme has started At the end of the programmeDetergents and additives Removing stainsHelpful hints and tips Washing programmes Washing programmesQuantity of detergent to be used Degrees of water hardnessMax. load 3,5 kg Reduced load 2 kg Main wash Rinses Long spin at 1200 rpm Max. load 3,5 kgRinse option will be activated automatically Main wash Rinses Short spin at 1200 rpmRelevant button Wool / Handwash Max. load 2 kgRinses Short spin at 1200 rpm Max. load 7 kgDescaling Care and cleaningMaintenance wash Care and cleaningWashing drum External cleaningDrain pump Door sealCleaning the water inlet filters Turn on the water tap Emergency emptying outWhat to do if… Frost precautionsWhat to do if… Clean the drain filterReplace it with a new one Reduce the detergent quantity or use anoth- er oneProgramme 60 Consumption valuesConsumption values White CottonsCottons Synthetics Delicates Technical dataInstallation UnpackingUnscrew the three bolts InstallationInstallation Slide out the relevant plastic spacers Water inlet Positioning and levellingEnd of the drain hose can be positioned in three ways Water drainageEcological hints Electrical connectionEnvironment concerns Packaging materialsPage Warranty Showroom