12
Rinse hold
1) Only available for Spin/Drain programme.
The default temperature of the programme.
J | Cold wash |
|
DAMPF BUTTON 4
Touch button 4 to set the steam level. This is possible only with programmes where the steam function is available. The duration of the steam phase changes accordingly to your selection.
MEMORY BUTTONS 5
Touch one of the buttons 5 to memo- rise a programme or to set a memo- rised programme.
Memorise a programme
1.Press button 1 to activate the ap- pliance.
2.Turn the programme knob ( 2 ) to your favourite programme.
ZEITVORWAHL BUTTON 7
Touch button 7 to delay the start of a programme from 30 minutes to 20 hours.
ZEITSPAREN BUTTON 8
Touch button 8 to decrease the pro- gramme time.
You can select:
SHORTENED DURATION To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no soil.
Some programmes accept only one of these functions.
3.If it is necessary, set one or more functions.
4.Touch and hold one of the buttons
5for some seconds. The buzzer sounds and the display shows that the programme is saved. .
Set a memorised programme
EXTRA SPÜLEN BUTTON 9
Touch button 9 to add rinsing phases to a programme.
Use this function for persons allergic to detergents and in areas where the wa- ter is soft.
1.Touch the button where you mem- orised the programme you want to set.
2.The programme indicator comes on and the display shows all the in- formation.
FLECKEN, VORWÄSCHE UND EINWEICHEN BUTTON 10
Touch button 10 to set one of the these functions:
To cancel a memorised pro- gramme you can only memorise a new programme.
START/PAUSE BUTTON 6
Touch button 6 to start or interrupt a programme.
FLECKEN
Use this function for laundry with hard stains to remove.
When you set this function, put the stain remover into compartment 
.
The programme duration in- creases.
This function is not available with a temperature lower than 40° C.