ENGLISH 23
If you deactivate the appliance, it is necessary to set the pro- gramme again.
AT THE END OF PROGRAMME
1.The appliance stops automatically.
2.The acoustic signals operate, if it is active.
3.In the display 
goes on and the message tells you that the pro- gramme is completed.
4.The indicator of button 6 goes off.
5.The door lock symbol goes off.
6.Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the AU- TO OFF function automatically de- activates the appliance.
When you activate the appli- ance again, the display shows the end of the last set pro- gramme. Turn the programme knob to set a new cycle.
7.Remove the laundry from the appli- ance. Make sure that the drum is empty.
8.Keep the door ajar, to prevent mil- dew and odours.
9.Close the water tap.
The washing programme is completed, but there is water in the drum:
–The drum turns regularly to prevent the creases in the laundry.
–The door stays locked.
–You must drain the water to open the door.
To drain the water:
1.If necessary, decrease the spin speed.
2.Touch button 6 . The appliance drains the water and spins.
3.When the programme is comple- ted and the door lock symbol goes off, you can open the door
4.Press button 1 to deactivate the appliance.
The appliance drain and spin automatically after approximate- ly 18 hours.