18
Standard programmes for the Energy Label consumption values
The cotton 60 °C economy and cotton 40 °C economy are the standard cotton programmes for normally soiled cotton laundry. They are suitable to clean nor- mally soiled cotton laundry and they
are the most efficient programmes in terms of combined energy and water consumption for washing that type of cotton laundry.
They agree with EN60456.
The actual water temperature may differ from the declared cy- cle temperature.
BEFORE FIRST USE
1.To activate the drain system, put 2 litre of water in the main wash com- partment of the detergent dispens- er.
2.Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without laun- dry. This removes all possible dirt from the drum and the tub.
LANGUAGE SETTING
The first time you activate the appli- ance, the display shows the default lan- guage and tells you to confirm it or change it:
•Turn the programme knob to set the desired language.
•When the display shows the necessa- ry language, touch button 6 to con- firm the selection.
Change the language after the first activation
1.Touch button 11 and button 10 at the same time for some seconds.
2.When display shows the language set, turn the programme knob to set the new language.
3.Touch button 6 to confirm the se- lection.
USING THE APPLIANCE
CLOCK SETTING
After you set the language, the display tells to set the clock:
•The hour digits flash.
•Turn the programme knob to change the hour.
•Touch button 6 to confirm the se- lection.
•The minute digits flash.
•Turn the programme knob to change the minutes.
•Touch button 6 to confirm the se- lection.
Change the time of the day after the first activation
1.Touch button 9 and the button
8at the same time for some sec- onds.
2.The hour digits flash.
3.Turn the programme knob to change the hour.
4.Touch button 6 to confirm the se- lection.
5.The minute digits flash.
6.Turn the programme knob to change the minutes.
7.Touch button 6 to confirm the se- lection.
1.Open the water tap.
2.Connect the mains plug to the mains socket.