22
SET THE DELAY START
1.Touch button 7 again and again to set the desired delayed start. The display shows the expected end of the programme
2.Touch button 6 , the appliance starts the countdown of the delay start.
When the countdown is comple- ted, the programme starts auto- matically.
Before you touch button 6 to start the appliance, you can can- cel or change the set of the de- lay start.
You cannot set the delay start with the Steam programme.
STARTING A PROGRAMME
1.Touch button 6 to start the pro- gramme. The indicator of button
6stops to flash and is on with red colour.
If a delayed start is set, the appliance starts the countdown.
The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces- sary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.
INTERRUPT A PROGRAMME
1.Touch button 6 . The indicator flashes.
2.Touch button 6 again. The wash- ing programme continues.
CANCEL A PROGRAMME
1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.
The appliance does not drain the water.
CHANGE A FUNCTION
You can change only some functions before they operate.
1.Touch button 6 . The indicator flashes.
2.Change the function set.
3.Touch button 6 again. The wash- ing programme continues.
OPEN THE DOOR
While a programme or the delay start operates, the appliance door is locked.
To open the appliance door:
1.Touch button 6 . The door lock symbol in the display goes off and a message tells you that the door is unlocked.
2.Open the appliance door.
3.Close the appliance door and touch button 6 again. The pro- gramme or the delay start contin- ues.
If the temperature and the level of the water is too high, the door lock symbol stays on. You cannot open the door. If neces- sary, do the following procedure to open the door:
1.Deactivate the appliance.
2.Wait for some minutes.
3.Make sure that no water is in the drum.