AEG L 60270 user manual Technical Information, Discard the Appliance

Water connection

•Do not connect the appliance with old hoses already used. Only use new ho- ses.

•Make sure not to cause damage to the water hoses.

•Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose.

•The first time you use the appliance, make sure that the water hoses and the couplings do not have leakages.

Electrical connection

•Make sure that the appliance is earth- ed.

•Make sure that the electrical informa- tion on the rating plate agrees with the power supply.

•Always use a correctly installed shock- proof socket.

•Do not use multiple plugs and exten- sion cables. There is a risk of fire.

ENGLISH 5

•Do not replace or change the mains ca- ble. Contact the service centre.

•Make sure not to cause damage to the mains plug and cable.

•Connect the mains plug to the mains socket only at the end of the installa- tion. Make sure that there is access to the mains plug after the installation.

•Do not pull the mains cable to discon- nect the appliance. Always pull the mains plug.

DISCARD THE APPLIANCE

1.Disconnect the mains plug from the mains socket.

2.Cut off the mains cable and discard it.

3.Discard the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffoca- tion (only for front-loading applian- ces).

TECHNICAL INFORMATION

Dimensions	Width / Height / Depth	600 / 850 / 522 mm
	Total depth	540 mm
Electrical connection:	Voltage	230 V
	Overall power	2200 W
	Fuse	10 A
	Frequency	50 Hz
Level of protection against ingress of solid particles		IPX4
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
Water supply pressure	Minimum	0,5 bar (0,05 MPa)
	Maximum	8 bar (0,8 MPa)
Water supply 1)		Cold water
Maximum load	Cotton	7 kg
Spin speed	Maximum	1200 rpm

1)Connect the water inlet hose to a water tap with a 3/4'' thread.