AEG L 60270 user manual Temperature Button, Acoustic Signals Function, Child Lock Function

Page 9

TEMPERATURE BUTTON 9

Press button 9 to change the default temperature.

= cold water

ACOUSTIC SIGNALS

FUNCTION

You can hear the acoustic signals when:

•You activate the appliance.

•You deactivate the appliance.

•You press the buttons.

•The programme is completed.

•The appliance has a malfunction.

To deactivate/activate the acoustic sig-

nals, press button 8 and button 9 at the same time for 6 seconds.

If you deactivate the acoustic sig- nals, they continue operate only when you press the buttons and when a malfunction occurs.

CHILD LOCK FUNCTION

This function prevents children to play with the control panel.

• To activate the function, press button

6and button 7 at the same time un- til the display shows the symbol .

•To deactivate the function, press but- ton 6 and button 7 at the same time until the symbol goes off.

You can activate the function:

•Before you press the Start/Pause but- ton 4 : the appliance cannot start.

•After you press the Start/Pause button

4, all the buttons and the programme knob are deactivated.

PERMANENT EXTRA RINSE FUNCTION

With this function you can keep the extra rinse function permanently on when you set a new programme.

• To activate the function press button

5and button 6 at the same time un- til the indicator of button 7 is on.

ENGLISH 9

•To deactivate the function press button 5 and button 6 at the same time un-

til the indicator of button 7 is off.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 60270 FL Contents Environment ConcernsVisit OUR Website for Accessories and Consumables Customer Care and ServiceFor Perfect Results General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Technical InformationProduct Description AccessoriesOn OFF Button Control PanelProgramme Knob DisplaySTART/PAUSE Button Delay Start ButtonTime Save Button Extra Rinse ButtonAcoustic Signals Function Temperature ButtonChild Lock Function Permanent Extra Rinse FunctionTime Save ProgrammesSpar TID1 Consumption Values Before First USE Using the ApplianceLoading the Laundry Filling the Detergent and AdditivesCheck the position of the flap Cancel a Programme Setting and Starting a ProgrammeSET the Delay Start Interrupt a ProgrammeCancel the Delay Start AT the END of the ProgrammeOpen the Door Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Medium Care and Cleaning Drain Pump Detergent DispenserEnglish Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsTroubleshooting Delay start is set Problem Possible cause Possible solution Installation Special Accessories for InstallationUnpacking Page English Inlet Hose Positioning and LevellingWater Drainage Water-stop devicePage English Page English 132928910-A-02-2012
Top Page Image Contents