AEG 97-115 Electrical connection, Permanent connection, Directly into a, Not more than 90 cm End

Page 37

Installation

Directly into a

drain pipe at a height of not less than 60 cm and

not more than 90 cm.

The end of the

drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked. Run it along the floor; only the part near the drainage point must be raised.

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

This operation has only to be performed by a qualified electrician.

73

Image 37
Contents Lavamat Dear customer Contents Page General notes Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyPackaging materials DiscardingMachine Tips for environmental protection Main features of your washing machine Front view Description of the applianceControl panel Temperature selector dialProgramme selector dial = Spin reduction button 500 £Half load button Yarim YÜK ON/OFF button Açma KapamaAnticrease button stop with water in drum KIRI‚IK Intensive rinse button EK DurulamaBefore the first wash Detergent and additive dispenser drawerSorting out and preparing the laundry Preparing the wash cycleWhites Types of fabric and care labelsColoureds Coloureds 40Woollens and particularly delicate items Delicates 40Detergents and additives Select the wash programme and temperature How to washLoad the laundry Add detergent and additiveStart the programme Select the required optionEnd of the programme Press the buttons according to the selected programmeEnergetic programmes for cottons and linen Programme chartMaximum load 5 kg Progr Temp Type of laundry Cycle descriptionProgr. Temp 30-60 30-40 Type of laundry Cycle description Maximum load 2 kg wool 1 kgConsumption data and duration of main programmes Programme Maximum Water Energy Duration TemperaturePeriodical cleaning Bodywork Cleaning and maintenanceAfter each wash Detergent dispenser drawerWater inlet filters Drain filterSmall objects Inadvertently left Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Something not working? Programme is still Wait until the end Running If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningBefore placing it on small tiles, apply a rubber coating Water drainage Water inletEnd of the drain hose can be positioned in three ways Permanent connection Electrical connectionDirectly into a Not more than 90 cm EndSatici F Irmanin Garanti B E L G E S