AEG L 60260 TL, L 60060 TL user manual English

Page 27

ENGLISH 27

With the plastic hose guide.

Without the plastic hose guide.

On the edge of a sink.

Make sure that the plastic guide cannot move when the appliance drains. At- tach the guide to the water tap or the wall.

To a stand pipe with vent-hole.

Refer to the illustration. Directly into a drain pipe at a height of not less than 70 cm and not more than 100 cm. The end of the drain hose must always be ventilated , i.e. the inner diameter of the drainpipe must be larger than the external diameter of the drain hose.

To a sink spigot.

Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. Make sure that the drain hose makes a loop to prevent that remaining particles go in the appliance from the sink.

Image 27
Contents TL L 60060 TL Contents Environment ConcernsVisit OUR Website for Accessories and Consumables Customer Care and ServiceFor Perfect Results Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Electrical connectionProduct Description AccessoriesDisplay Control PanelOn OFF Button Programme KnobExtra Rinse Button Delay Start ButtonSTART/PAUSE Button Time Save ButtonTemperature Button Child Lock FunctionPermanent Extra Rinse Function Washing Programmes Time SAVE1 Consumption ValuesBefore First USE Using the ApplianceFilling the Detergent and Additives Loading the LaundrySetting and Starting a Programme Stubborn Stains AT the END of ProgrammeHelpful Hints and Tips Laundry LoadWater Hardness Ecological HintsCare and Cleaning Inlet Hose Filter Valve Filter Emergency Drain Frost PrecautionsTroubleshooting Delay start is set Technical Information Unpacking InstallationPage Positioning and Levelling Water Drainage Inlet HoseEnglish Page English Page English 108616700-B-472011