AEG 74335 manual Cover the hole with the cap G

Page 39

Installation and connection instructions

3	The special spanner (E) and the
	caps (D) (2 each) and (G) (1 each)

are supplied with it.

3. Remove the two screws (A) with the special spanner.

4. Remove the 4 screws (B).

5. Remove the transit bar (C).

6. Screw the 4 screws (B) back in for safe keeping.

7. Close the 2 large holes with the caps (D).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

8. Remove the screw F, including the compression spring with the spe- cial spanner E.

9. Cover the hole with the cap G.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

39

Image 39

Contents ÖKO-LAVAMAT 74335 update Appliance Dear CustomerPages of this instruction book Future ownersContents What to do if Separate spinContents Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelWool P hand wash Fect Stain removers only become effective at higher temperaturesProgramme option buttons Shortened main washing cycle for lightly soiled washingConsumption data and wash times What does Update mean?Before the First Wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Changing the spin speed/Selecting Rinse Hold Setting the Washing ProgrammeOpening and closing the door Loading the washingSee Programme Tables for maximum loads Adding detergent / conditioner If using liquid detergent / tabletsAdd detergent / conditioner Conditioners Open the detergent dispenser drawerStarting the Washing Programme Washing Programme ProgressProgramme progress display Changing the Spin Speed Change the washing programmeChanging or stopping the wash programme Selecting the programme optionsWashing cycle is complete/Removing the washing Washing Programme tablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingInstructions Clean the detergent dis Display lights up If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionChild Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap G Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG