AEG 74335 manual Water Drainage

Page 46

Installation and connection instructions

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.

Important! It is essential to lay the drainage hose without kinks.

When discharging into a stand- pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) above floor level.

The upright standpipe should have a minimum, length of

30 cm (12’’) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

46

Image 46

Contents ÖKO-LAVAMAT 74335 update Future owners Dear CustomerPages of this instruction book ApplianceContents Separate spin What to do ifContents Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorWool P hand wash Shortened main washing cycle for lightly soiled washing Stain removers only become effective at higher temperaturesProgramme option buttons FectWhat does Update mean? Consumption data and wash timesPreparing a Wash Load Before the First WashSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Changing the spin speed/Selecting Rinse HoldLoading the washing Opening and closing the doorSee Programme Tables for maximum loads Conditioners Open the detergent dispenser drawer If using liquid detergent / tabletsAdd detergent / conditioner Adding detergent / conditionerWashing Programme Progress Starting the Washing ProgrammeProgramme progress display Selecting the programme options Change the washing programmeChanging or stopping the wash programme Changing the Spin SpeedWashing cycle is complete/Removing the washing Programme tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifInstructions Clean the detergent dis Display lights up If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterCancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Setting the child safety feature Child Safety FeatureCancelling the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap G Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty conditions Great BritainIndex PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG