Xerox AQLF9D 69 U manual Trouble shooting, Problem Possible causes / Solutions

Page 15

Trouble shooting

Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre

 

(see “Assistance”), make sure that the problem cannot be not solved easily using the following list.

EN

Problem:

Possible causes / Solutions:

 

 

The washing machine does not switch on.

The wash cycle does not start.

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power in the house.

•The door is not closed properly.

•The START/PAUSE button has not been pressed.

•The water tap has not been opened.

•A DELAY TIMER has been set.

The washing machine does not fill with water.

•The water inlet hose is not connected to the tap.

•The hose is bent.

•The water tap has not been opened.

•There is no water supply in the house.

•The pressure is too low.

•The START/PAUSE button has not been pressed.

The washing machine door remains locked.

•If you have selected the “Baby ” cycle or the “Easy iron ” option, when the wash cycle has finished the machine will slowly rotate the drum; to end

the cycle press the START/PAUSE button or the “Easy iron ” button. If

you have selected the “Silk ” wash cycle, the machine will end the cycle while the laundry is soaking; to drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy iron ” button.

The machine continuously fills with water and drains.

The washing machine does not drain or spin.

The machine vibrates a lot during the spin cycle.

The washing machine leaks.

The icons corresponding to the “Phase in progress” flash rapidly at the same time as the ON/OFF indicator light.

There is too much foam.

The washing machine door remains locked after a blackout.

•The drain hose is not fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The free end of the hose is under water (see “Installation”).

•If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washing machine to fill with water and drain continuously. Special anti-draining valves are available in shops and help to prevent this inconvenience.

•The wall drainage system is not fitted with a breather pipe.

•The wash cycle does not include draining: Some wash cycles require the drain phase to be started manually (see “Wash cycles and options”).

•The “Easy iron” option is enabled: to complete the wash cycle, press the START/PAUSE button (“Wash cycles and options”).

•The drain hose is bent (see Installation).

•The drainage duct is clogged.

•The drum was not unlocked correctly during installation (see “Installation”).

•The machine is not level (see “Installation” ).

•The machine is trapped between cabinets and walls (see “Installation”).

•The load is unbalanced (see “Detergents and laundry”).

•The water inlet hose is not screwed on properly (see “Installation”).

•The detergent dispenser is blocked (to clean it, see “Care and maintenance”).

•The drain hose is not fixed in place properly (see “Installation”).

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again. If the problem persists, contact the Technical Assistance Service.

•The detergent is not suitable for machine washing (it should display the text “for washing machines” or “hand and machine wash”, or the like).

•Too much detergent was used.

•Perform the manual unlocking procedure (see “Precautions and tips”).

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Washing Machine Instructions for installation and useInstallation Connecting the electricity and water suppliesUnpacking and levelling Carried OUT by a Qualified Electrician Following Operations should beBlue Neutral N Brown Live L Green & Yellow Earth E AQLF9D 69 U Technical dataPorthole Door Description of the machineControl PanelTouch control panel Auto Dose System Machine and without Close the Porthole Door Running a wash cycleWash cycles and options Table of wash cyclesWash options Washing recommendations Detergents and laundryDetergent Preparing the laundryOpening the porthole door manually Precautions and tipsGeneral safety DisposalCare and maintenance Problem Possible causes / Solutions Trouble shootingTroubleshooting Assistance GuaranteeENAfter Sales Service Page 195077709.05

AQLF9D 69 U specifications

The Xerox AQLF9D 69 U is a multifunction printer that stands out in both efficiency and versatility, making it an ideal choice for small to medium-sized businesses. With its advanced technologies, the AQLF9D 69 U integrates features that streamline workflows and enhance productivity.

One of the standout features of this model is its exceptional print speed, delivering up to 40 pages per minute. This rapid output is complemented by a first-page-out time as quick as 6 seconds, ensuring that even the busiest work environments can rely on it for high-volume tasks. The printer supports a maximum paper capacity of 2,300 sheets, allowing users to tackle large print jobs without frequent interruptions for reloading.

The Xerox AQLF9D 69 U incorporates advanced printing technologies such as Solid Ink, which delivers vibrant colors while reducing waste. Unlike traditional toner cartridges, Solid Ink sticks use solid blocks of ink that eliminate the need for packaging and contribute to a smaller environmental footprint. This technology not only results in superior print quality but also makes replacements more straightforward.

Additionally, the AQLF9D 69 U features automatic duplex printing, which not only saves time but also reduces paper usage, making it an environmentally conscious choice for organizations focused on sustainability. The device is compatible with various media types and sizes, further enhancing its adaptability to different printing requirements—from standard letter-sized documents to custom-sized materials.

The multifunction functionality encompasses scanning, copying, and faxing, providing a comprehensive solution for all documentation needs. The scanner can capture documents at high resolutions and supports various file formats, making it easy to digitize important paperwork. With a user-friendly touchscreen interface, navigating settings and features is intuitive, even for those less experienced with technology.

Networking capabilities are robust, with options for both wired and wireless connections. The AQLF9D 69 U seamlessly integrates with existing office networks, whether through Ethernet or Wi-Fi. Mobile printing solutions such as Apple AirPrint and Google Cloud Print make it convenient for users to print directly from their smartphones or tablets.

In summary, the Xerox AQLF9D 69 U is a powerful, energy-efficient multifunction printer that leverages innovative technology to provide high-quality prints, scans, and copies. With its emphasis on speed, sustainability, and user-friendly operation, it is a valuable asset for any office environment.
Top Page Image Contents