Installation, Unpacking and levelling | Xerox AQLF9D 69 U specification

Installation

This instruction manual should be kept in a safe place

EN	for future reference. If the washing machine is sold,
	for future reference. If the washing machine is sold,
	given away or moved, please ensure the manual is kept
	with the machine, so that the new owner may benefit
	from the advice contained within it.
	Read these instructions carefully: they contain vital
	information relating to the safe installation and operation
	of the appliance.
	Inside the pack containing this manual, you will also
	find the guarantee and all the details necessary for
	installation.
	Unpacking and levelling

Unpacking

1.Once you have removed all the packaging from the washing machine, make sure it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2. Remove the 4 protective screws (used during transportation) and the corresponding spacer, located on the rear part of the appliance (see figure).

3.Close off the holes using the plastic plugs supplied in the pack.

4.Keep all the parts in a safe place; they will be needed again if the washing machine is moved to another location, to prevent the inside of the appliance being damaged.

Packaging materials should not be used as toys for children.

Levelling

1.Place the washing machine on a flat sturdy floor, without resting it up against walls or cabinets.

2. If the floor is uneven, the front feet of the machine may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees).

If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.

If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

Before connecting the inlet hose to the water supply, run the water until it is perfectly clear.

1. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top right- hand side of the rear part of the appliance (see figure).

2. Connect the inlet hose by screwing it to a cold water tab using a 3/4 gas threaded connection (see figure).

3. Make sure that the hose is not folded over or bent.

The water pressure at the tap must fall within the values indicated in the Technical data table (see next page).

If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

Never use second-hand or old inlet hoses; use the products supplied with the machine.

AQLF9D 69 U specifications

The Xerox AQLF9D 69 U is a multifunction printer that stands out in both efficiency and versatility, making it an ideal choice for small to medium-sized businesses. With its advanced technologies, the AQLF9D 69 U integrates features that streamline workflows and enhance productivity.

One of the standout features of this model is its exceptional print speed, delivering up to 40 pages per minute. This rapid output is complemented by a first-page-out time as quick as 6 seconds, ensuring that even the busiest work environments can rely on it for high-volume tasks. The printer supports a maximum paper capacity of 2,300 sheets, allowing users to tackle large print jobs without frequent interruptions for reloading.

The Xerox AQLF9D 69 U incorporates advanced printing technologies such as Solid Ink, which delivers vibrant colors while reducing waste. Unlike traditional toner cartridges, Solid Ink sticks use solid blocks of ink that eliminate the need for packaging and contribute to a smaller environmental footprint. This technology not only results in superior print quality but also makes replacements more straightforward.

Additionally, the AQLF9D 69 U features automatic duplex printing, which not only saves time but also reduces paper usage, making it an environmentally conscious choice for organizations focused on sustainability. The device is compatible with various media types and sizes, further enhancing its adaptability to different printing requirements—from standard letter-sized documents to custom-sized materials.

The multifunction functionality encompasses scanning, copying, and faxing, providing a comprehensive solution for all documentation needs. The scanner can capture documents at high resolutions and supports various file formats, making it easy to digitize important paperwork. With a user-friendly touchscreen interface, navigating settings and features is intuitive, even for those less experienced with technology.

Networking capabilities are robust, with options for both wired and wireless connections. The AQLF9D 69 U seamlessly integrates with existing office networks, whether through Ethernet or Wi-Fi. Mobile printing solutions such as Apple AirPrint and Google Cloud Print make it convenient for users to print directly from their smartphones or tablets.

In summary, the Xerox AQLF9D 69 U is a powerful, energy-efficient multifunction printer that leverages innovative technology to provide high-quality prints, scans, and copies. With its emphasis on speed, sustainability, and user-friendly operation, it is a valuable asset for any office environment.