Xerox AQLF9D 69 U manual Machine and without

Page 9

Signals for successive refilling:

Once, at the end of a cycle, the level of detergent/fabric softener falls below the level required for a successive wash cycle, the display will visualise the relative messages "At end of cycle refill detergent" or "At end of cycle refill softener" or "At end of cycle refill tanks". If the tanks are not filled, the successive wash cycles in Auto Dose System will be carried out without any intake of detergent.

￿We suggest adding detergent and fabric softener ONLY after the machine's signal.

￿NEVER mix two different detergents; always clean out the tank before adding a new type of detergent (refer to "Cleaning cycle set by the user").

Using the "Auto Dose System"

If the compartments have been filled with detergent and fabric softener, you may start using the machine (refer to "Running a wash cycle").

Powder detergents for pre-washing and powder additives may only be used in the traditional mode or using the "Auto Dose System", by placing the additives directly inside the drum, preferably in conjunction with the "laundry ball".

Modifying pre-set parameters:

The machine automatically intakes detergent on the basis of the selected programme, wash load and water hardness. However, the amount of detergent/fabric softener used may be modified.

button: press to increase, decrease and to exclude detergent intake.

button: press to increase, decrease and to exclude fabric softener intake.

The level of detergent/fabric softener suggested by the machine is indicated by 3 bars.

Less than 3 bars indicates a lower level of detergent/ fabric softener compared to that suggested by the machine, while more than 3 bars indicates a higher level of detergent/fabric softener.

Cleaning the tanks:

Tank cleaning cycles can either be automatic or pre-set by the user.

Automatic cleaning:

The washing machine carries out an automatic cleaning cycle during the rinse cycle if the level of detergent that remains is insufficient for carrying out a successive wash cycle.

Cleaning cycle set by the user:

Run the cleaning cycle (with empty drum) if you require EN adding a different product to the previous one or if the

tanks have been incorrectly filled (e.g. fabric softener has been erroneously poured into the detergent tank or

vice-versa). Press button and hold for 5 sec. to activate cleaning of the detergent tank, button for cleaning the fabric softener tank or button for cleaning both tanks. Keep pressing for a further 3 sec. (the countdown "4-3-2-1" will appear in the top right corner) until "CLEAN-GO" pops up.

The cleaning cycle lasts about 40' if the tanks are initially empty; if not, the cycle will last longer. The icons indicating that the tanks are empty will appear on the display.

"Traditional" mode

Pull out the detergent dispenser drawer up to the first stop point (see picture) then pour the amount of detergent and other additives (e.g. bleach) required for a single wash cycle directly into the dispenser.

1. pre-wash compartment: use powder detergent only.

12. main wash

2

3

compartment: use powder

or liquid detergent. If the

 

 

 

latter is used, we

 

 

recommend pouring it into

 

 

the dispenser immediately

 

 

before starting the washing

 

 

machine and without

running a pre-wash cycle.

3.! Do not pour anything in this compartment.

Tablet detergent or the relative "laundry ball" must be added directly inside the drum. In this event, deactivate

the "Auto Dose System" (by pressing the button until the relative vertical bars disappear from the display).

Do not pour any fabric softener as the appropriate quantity required for each wash cycle will be automatically extracted.

To deactivate fabric softener intake, press the button until the vertical bars disappear from the display.

For wool and silk garments, we recommend using a special detergent which must be poured directly into the detergent dispenser (compartment 2).

Running the wash cycle:

Select the programme and the compatible options on the basis of the required need and type of load.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Washing Machine Instructions for installation and useInstallation Connecting the electricity and water suppliesUnpacking and levelling Carried OUT by a Qualified Electrician Following Operations should beBlue Neutral N Brown Live L Green & Yellow Earth E AQLF9D 69 U Technical dataControl Description of the machinePanel Porthole DoorTouch control panel Auto Dose System Machine and without Close the Porthole Door Running a wash cycleWash cycles and options Table of wash cyclesWash options Detergent Detergents and laundryPreparing the laundry Washing recommendationsGeneral safety Precautions and tipsDisposal Opening the porthole door manuallyCare and maintenance Problem Possible causes / Solutions Trouble shootingTroubleshooting Assistance GuaranteeENAfter Sales Service Page 195077709.05

AQLF9D 69 U specifications

The Xerox AQLF9D 69 U is a multifunction printer that stands out in both efficiency and versatility, making it an ideal choice for small to medium-sized businesses. With its advanced technologies, the AQLF9D 69 U integrates features that streamline workflows and enhance productivity.

One of the standout features of this model is its exceptional print speed, delivering up to 40 pages per minute. This rapid output is complemented by a first-page-out time as quick as 6 seconds, ensuring that even the busiest work environments can rely on it for high-volume tasks. The printer supports a maximum paper capacity of 2,300 sheets, allowing users to tackle large print jobs without frequent interruptions for reloading.

The Xerox AQLF9D 69 U incorporates advanced printing technologies such as Solid Ink, which delivers vibrant colors while reducing waste. Unlike traditional toner cartridges, Solid Ink sticks use solid blocks of ink that eliminate the need for packaging and contribute to a smaller environmental footprint. This technology not only results in superior print quality but also makes replacements more straightforward.

Additionally, the AQLF9D 69 U features automatic duplex printing, which not only saves time but also reduces paper usage, making it an environmentally conscious choice for organizations focused on sustainability. The device is compatible with various media types and sizes, further enhancing its adaptability to different printing requirements—from standard letter-sized documents to custom-sized materials.

The multifunction functionality encompasses scanning, copying, and faxing, providing a comprehensive solution for all documentation needs. The scanner can capture documents at high resolutions and supports various file formats, making it easy to digitize important paperwork. With a user-friendly touchscreen interface, navigating settings and features is intuitive, even for those less experienced with technology.

Networking capabilities are robust, with options for both wired and wireless connections. The AQLF9D 69 U seamlessly integrates with existing office networks, whether through Ethernet or Wi-Fi. Mobile printing solutions such as Apple AirPrint and Google Cloud Print make it convenient for users to print directly from their smartphones or tablets.

In summary, the Xerox AQLF9D 69 U is a powerful, energy-efficient multifunction printer that leverages innovative technology to provide high-quality prints, scans, and copies. With its emphasis on speed, sustainability, and user-friendly operation, it is a valuable asset for any office environment.
Top Page Image Contents