Following Operations should be | Xerox AQLF9D 69 U specs

Connecting the drain hose

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

• the supply voltage is included within the values i

ndicated on the Technical details table (see page 5);	EN
ndicated on the Technical details table (see page 5);
• the socket is compatible with the washing
machine's plug. If this is not the case, replace
the socket or the plug.
Your appliance is now supplied with a 13 amp fused plug
it can be plugged into a 13 amp socket for immediate
use. Before using the appliance please read the
instructions below.
WARNING - THIS APPLIANCE MUST BE EARTHED.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

THE FOLLOWING OPERATIONS SHOULD BE

CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved

fuse to BS 1362 should always be used, and the fuse

cover re-fitted. If the fuse cover is lost, the plug must not

be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or

the colour that is embossed in words on the base of the

plug. Replacements can be obtained directly from your

nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and

you should wish to re-route the mains cable through

partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable

plug bearing the BSI mark of approval.

We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

or:

the mains cable is wired directly into a 13 amp cable

outlet, controlled by a switch, (in compliance with BS

5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make

the pins unusable so that it cannot be accidentally

inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	Earth
Blue	Neutral
Brown	Live

AQLF9D 69 U specifications

The Xerox AQLF9D 69 U is a multifunction printer that stands out in both efficiency and versatility, making it an ideal choice for small to medium-sized businesses. With its advanced technologies, the AQLF9D 69 U integrates features that streamline workflows and enhance productivity.

One of the standout features of this model is its exceptional print speed, delivering up to 40 pages per minute. This rapid output is complemented by a first-page-out time as quick as 6 seconds, ensuring that even the busiest work environments can rely on it for high-volume tasks. The printer supports a maximum paper capacity of 2,300 sheets, allowing users to tackle large print jobs without frequent interruptions for reloading.

The Xerox AQLF9D 69 U incorporates advanced printing technologies such as Solid Ink, which delivers vibrant colors while reducing waste. Unlike traditional toner cartridges, Solid Ink sticks use solid blocks of ink that eliminate the need for packaging and contribute to a smaller environmental footprint. This technology not only results in superior print quality but also makes replacements more straightforward.

Additionally, the AQLF9D 69 U features automatic duplex printing, which not only saves time but also reduces paper usage, making it an environmentally conscious choice for organizations focused on sustainability. The device is compatible with various media types and sizes, further enhancing its adaptability to different printing requirements—from standard letter-sized documents to custom-sized materials.

The multifunction functionality encompasses scanning, copying, and faxing, providing a comprehensive solution for all documentation needs. The scanner can capture documents at high resolutions and supports various file formats, making it easy to digitize important paperwork. With a user-friendly touchscreen interface, navigating settings and features is intuitive, even for those less experienced with technology.

Networking capabilities are robust, with options for both wired and wireless connections. The AQLF9D 69 U seamlessly integrates with existing office networks, whether through Ethernet or Wi-Fi. Mobile printing solutions such as Apple AirPrint and Google Cloud Print make it convenient for users to print directly from their smartphones or tablets.

In summary, the Xerox AQLF9D 69 U is a powerful, energy-efficient multifunction printer that leverages innovative technology to provide high-quality prints, scans, and copies. With its emphasis on speed, sustainability, and user-friendly operation, it is a valuable asset for any office environment.