Dosing depends upon:
–the washing’s degree of soiling,
–the size of the load
–the degree of hardness of the water supply.
•If the manufacturer does not give instructions for small loads: for a half load, use a third less, for a very small load, use only half of the detergent that is recommended for a full load.
•From water hardness 2 (= medium) upwards, water softener should be used. Detergent can then always be dosed for water hardness 1 (= soft). Your local water company will be able to give you informa- tion about the water hardness in your area.
1.Pull the detergent dispenser drawer out as far as the stop.
2.Add the detergent/additives.
3.Push the drawer in fully.
Washing powder/tablets | ||
for the main wash | tablets | |
Softeners/ | Washing powder/tablets | |
for the | ||
or for water softener | ||
to preserve the shape | ||
| ||
of garments/ |
| |
starch |
|
Washing powder/tablets for the main wash
If you are using water softener and need the
Softeners,
Do not fill the compartment beyond the MAX mark. Dilute thick liquid concentrates according to the manufacturer’s instructions before putting them into the drawer. Dissolve powder starches.
If you use liquid detergents:
Add liquid detergent using the dosage container provided by the deter- gent manufacturer and place on top of the washing drum.
12