What to do if...
Remedying small malfunctions
If during use of the appliance one of the following error codes is shown in the
–E10 (Problems with water inflow),
–E20 (Problems with water outflow),
–E40 (door open),
please have a look at the following table.
When the fault is remedied, press the button (START/PAUSE). In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again.
button (START/PAUSE).
If the error appears again, please contact the Customer Care Depart- ment, stating the error code.
Problem |
| Possible cause |
| Remedy | |
| Mains plug not plugged in | Connect the plug to a mains | |||
| or fuse not working. | socket. Check fuse. | |||
Washing machine is not | Door not closed properly. | Close door - there should be | |||
an audible click. | |||||
working. |
|
| |||
|
|
|
| ||
| The | button (START/ | Press the | button | |
| PAUSE) button was not | ||||
| (START/PAUSE). | ||||
| pressed for long enough. | ||||
|
|
| |||
The door cannot be | Child safety device engaged. | Release the child safety de- | |||
closed. | vice. |
| |||
When a button is | The selected function can- |
|
| ||
pressed, Err appears in | not be combined with the | Select another function. | |||
the | programme set. |
|
| ||
E40 appears. |
|
|
|
| |
indicator (END) | The door is not closed prop- | Close the door properly. Re- | |||
flashes 4x, at the same | |||||
erly. |
| start the programme. | |||
time an acoustic signal |
| ||||
|
|
|
| ||
sounds 4x. |
|
|
|
| |
E10 appears. | Tap turned off. | Turn on the tap. | |||
indicator (END) | The filter in the threaded in- | Turn off the tap. Unscrew the | |||
flashes 1x, at the same | |||||
hose, take out the filter and | |||||
time an acoustic signal | let hose fitting is blocked. | clean it. |
| ||
sounds 1x. |
|
|
| ||
|
|
|
| ||
(Problems with water | Water tap is furred with | Check the tap and have it re- | |||
inflow) | lime scale or is faulty. | paired, if necessary. | |||
|
|
|
|
|
19