36What to do if...
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the yellow pilot light ot the button 8. blinks, one of the following alarm codes appears on the display and at the same some acoustic signals sound to indicate that the machine is not working:
●Problem with the water supply: «Cannot fill water. Please check that the tap is open and then press START».
●Problem with the water draining: «Cannot drain the water. Please check that the filter is clean and then press START»
●Door open: «Please check that the door is closed properly and then press
START»
●
Once the problem has been eliminated, press the button 8. to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Problem
The washing machine does not start:
Possible cause/Solution
The door has not been closed. «Please check that the door is closed properly and then press
START»
●Close firmly the door.
The plug is not properly inserted in the power socket.
●Insert the plug into the power socket.
There is no power at the socket.
●Please check your domestic electrical installation.
The main fuse has blown.
●Replace the fuse.
The selector dial is not correctly positioned and the button 8 has not been depressed.
●Please turn the selector dial and press the button 8 again.
The delay start has been selected.
●If the laundry are to be washed immediately, cancel the delay start.
The CHILD SAFETY LOCK has been activated.
• Deactivate this device.