AEG 86850 manual Washing drum, Door seal, Drain pump

Page 33

Care and cleaning 33

2.Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will go, so that it is firmly in place.

5.Clean all parts of the washing ma-

chine, especially the nozzles in the top of the washing-in chamber, with a brush.

6.Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any washing to clean off any cleaning agent residues. Programme: COTTONS/LINEN 90° or 95°C, press the button 6, add approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if

the machine does not empty and/or

spin

the machine makes an unusual noise

during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows:

1.Disconnect the appliance.

2.If necessary wait until the water has cooled down.

Image 33
Contents Lavamat Dear Customer Contents Washing programmes Programme information Washing hints Enviroment concerns Safety information Prior to using for the first timeGeneral safety Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionControl panel Display shows the following information DisplayAlarm codes Delay startProgramme progress display Incorrect option selectionSetting the language Setting the timeFirst Use Setting the contrast Setting the brightnessSetting the acoustic signal PersonalizationReturn to main menu Daily UseLoad the laundry Measure out the detergent and the fabric softenerSelect the temperature button Select the Prewash option Programme options buttonSelect the Sensitive option Select the Stain optionSelect the Extra Rinse option Select the Save Memory optionSelection of the Child Lock option Setting Child lock optionSelect the Delay Start button Select the Time Saving option buttonSelect the START/PAUSE button Cancelling a programme Altering an option or a running programmeInterrupting a programme At the end of the programme Opening the door after the programme has startedType of laundry Washing programmesDelicate Programme Programme informations Silk Outdoor Sports Preparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryLaundry weights Maximum loadsRemoving stains Detergents and additives Degrees of water hardness Quantity of detergent to be usedCare and cleaning Washing drum Door sealDrain pump There can be hot water in the pump. Never Frost precautions Water inlet filterEmergency emptying out START» What to do ifMachine does not fill Machine fills then empties immediately Problem No water is visible in the drum Technical Data KWh Consumption valueUnpacking InstallationInstallation Water inlet Positioning and levellingWater drainage Water-stop deviceOnto a sink outlet spigot Electrical connection Interest of the environmentPermanent connection Packaging materials Enviroment concernsOld machine Ecological hints0870 5 929 Standard guarantee conditionsCustomer Care 132 966 571-00-052008 Subject to change without notice