AEG 52840 manual Installation, Unpacking, Polystyrene base from the bottom

Page 38

38Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the

polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the

draining hose from the hose holders on the rear of the

appliance.

HEC0001

3. With a suitable spanner unscrew and remove the central rear bolt A.

A

HEC00022

Image 38

Contents Lavamat Dear Customer Contents Preparing the wash cycle 21-25 Installation 38-42 Packaging materials Old machine Ecological hintsGeneral safety Safety informationPrior to using for the first time Installation Keep all detergents in a safe place out of children’s reach Child SafetyUse Product description Detergent dispenser drawer«Stain» button «Extra quick» button «Start/Pause» button Control panelFirst Use Measure out the detergent and the fabric softener Daily UseLoad the laundry If required, pour fabric softener intoSelect the required programme Select the spin speed or the rinse hold optionProgramme option button Select the Stain optionSelect the Extra Quick option Select the «Start/Pause»Delay Start can not be selected with Drain programme Select the Delay StartDesired delay. The relevant light illuminates Programme progress displayAltering an option or a running programme Cancelling a programmeSelect an additional rinse Interrupting a programmeAt the end of the programme Washing programmes Options Description ProgrammeOptions Programme informations Wool Handwash /Silk Delicate rinses Drain Spin RefreshSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryMaximum loads Laundry weightsFollowing weights are indicative Removing stains Marked before starting the wash programme Detergents and additivesQuantity of detergent to be used Degrees of water hardness International wash code symbols Care and cleaning Washing drum Door sealDrain pump Emergency emptying out Clean the pump if necessary as previously describedWater inlet filter Frost precautions Possible cause/Solution Something not workingMachine fills then empties immediately Possible cause/Solution Problem Possible cause/Solution Techinical Data Door includedConsumption value Delicate rinses Drain Spin Refresh EcoPolystyrene base from the bottom InstallationUnpacking Installation Connect the hose with the angled connection to the machine Positioning and levellingWater inlet Water drainage End of the drain hose can be positioned in three waysElectrical connection Permanent connectionOld machine Enviroment concernsPackaging materials Ecological hintsEuropean Guarantee Customer service centres 192 999 930-01-252008 Subject to change without notice