AEG 52840 manual At the end of the programme

Page 17

Use 17

At the end of the programme

The machine stops automatically. The Start/Pause light goes off and the phase

light end illuminates.

If the Rinse Hold option has been selected, the light remains lit, the

phase light end illuminates, the door remains locked to indicate that the water must be emptied out before opening the door.

To empty out the water please read the steps on the Rinse Hold option paragraph.

Turn the programme selector dial to O to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Image 17
Contents Lavamat Dear Customer Contents Preparing the wash cycle 21-25 Packaging materials Old machine Ecological hints Installation 38-42General safety Safety informationPrior to using for the first time Installation Keep all detergents in a safe place out of children’s reach Child SafetyUse Detergent dispenser drawer Product description«Stain» button «Extra quick» button «Start/Pause» button Control panelFirst Use Load the laundry Daily UseMeasure out the detergent and the fabric softener If required, pour fabric softener intoSelect the spin speed or the rinse hold option Select the required programmeSelect the Stain option Programme option buttonSelect the «Start/Pause» Select the Extra Quick optionDesired delay. The relevant light illuminates Select the Delay StartDelay Start can not be selected with Drain programme Programme progress displaySelect an additional rinse Cancelling a programmeAltering an option or a running programme Interrupting a programmeAt the end of the programme Options Description Programme Washing programmesOptions Wool Handwash /Silk Delicate rinses Drain Spin Refresh Programme informationsPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsFollowing weights are indicative Removing stains Marked before starting the wash programme Detergents and additivesQuantity of detergent to be used Degrees of water hardness International wash code symbols Care and cleaning Door seal Washing drumDrain pump Emergency emptying out Clean the pump if necessary as previously describedWater inlet filter Frost precautions Something not working Possible cause/SolutionMachine fills then empties immediately Possible cause/Solution Problem Possible cause/Solution Door included Techinical DataDelicate rinses Drain Spin Refresh Eco Consumption valuePolystyrene base from the bottom InstallationUnpacking Installation Connect the hose with the angled connection to the machine Positioning and levellingWater inlet End of the drain hose can be positioned in three ways Water drainagePermanent connection Electrical connectionPackaging materials Enviroment concernsOld machine Ecological hintsEuropean Guarantee Customer service centres 192 999 930-01-252008 Subject to change without notice