Operating instructions
Changing the Spin Speed/Selecting Rinse Hold
0 If desired, reduce the spin speed for the final spin or select rinse hold:
– Press the button for the required spin speed
– press the o (RINSE HOLD) button.
The indicator for the required spin speed (or o ) illuminates.
If o (RINSE HOLD) is selected, the washing is left in the last rinse water, it is not spun.
3If you do not reduce the spin speed, the final spin for all washing programs is automatically performed at 1000 revolutions per minute.
The speed for the intermediate spin is dependent on the program selected and cannot be changed.
During the Washing Program
Program Progress Indicator
The program selector serves as a program progress indicator by rotating in a clockwise direction to the end of the program.
3In the case of the STAIN (position 1), MAIN WASH (position 2) and QUICK WASH (position 3) programs, immediately after program start the program selector moves to a position directly behind QUICK WASH (position 3). The program selector then indicates the progress of the program as usual.
Changing Settings
During the washing program you can:
–Change the spin speed
–Select o (RINSE HOLD)
–Change the temperature setting Other settings cannot be altered.
Stopping the Program Early
01.Press the M (ON/OFF) button.
2.Turn the program selector clockwise to position 8 (PUMP OUT).
3.Press the M (ON/OFF) button again. The water is pumped out.
20