Installation and Connection Instructions
Prepare the installation place
•The installation surface must be clean and dry, free of floor wax and other smearing substances, so that the appliance does not slip off. Do not use any lubricant as sliding aid.
•Installation on a
•By installation surfaces with
•Small unevenness of the floor surface should never be levelled out by laying pieces of wood, carton or similar elements, but rather basically compensated by adjusting the screw feet.
•When it is unavoidable to install the appliance besides a gas or a
•The washing machine may not be installed in a
Flexible feed and drain tubings may not be crinkled or squeezed..
Installation on a concrete base
When installing on a concrete base, for safety reasons it is imperative that steel plates are installed, the washing machine is then installed in these plates. The steel plates are available from customer service under
Installation on vibrating floors
In the case of floors that vibrate, especially wooden floors with floor- boards that flex, a
38