AEG 60300 manual What to do when…, Trouble Shooting

Page 27

Operating instructions

What to do when…

3The somewhat different, in comparison to older wash-

ing machines, whistling noise during spinning is due to the modern drive system.

A rattling sound on startup – in particular when using for the first time – is caused by the circulation pump and is due to the design.

Trouble Shooting

In the case of a malfunction try to solve the problem with the aid of the notes given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee.

Malfunction

Possible Cause

Remedy

 

 

 

Washing machine does

Mains plug is not plugged in.

Insert mains plug.

 

Replace fuse or switch on

not work.

House fuse in defective.

 

trip.

 

 

 

Door is not closed properly.

Close door, lock must engage

 

audibly

 

 

 

 

 

 

 

Press the M (ON/OFF) but-

 

 

ton;

The machine does not

Tap is closed.

Open tap;

Reselect program;

take in water.

 

 

Press the M (ON/OFF) button

 

 

 

 

again.

 

Sieve in the threaded fitting

Unscrew the hose from the

 

on the water inlet hose is

tap, remove the sieve and

 

blocked.

clean under running water

 

 

 

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents ÖKO-LAVAMAT Dear customer Contents Installation and Connection Instructions Contents Intended use SafetyOperating Instructions Prior to initial start-upGeneral Safety Safety of childrenDispose of your old appliance DisposalEnvironmental protection tips Dispose of the packagingDescription of the Appliance Front ViewDrawer for Detergent and Conditioner Program Selector Control PanelWashing Type Button Temperature SelectorConsumption Data and Time Required ON/OFF ButtonWoollens Before Washing for the First Time Sort washing and prepare Prepare washing cycleWashing Types and Care Symbols Information on Water Hardness Using Water SoftenerDetergent and conditioner Which detergent and conditioner? How much detergent and conditioner?Performing a Wash Brief InstructionsAt the end of the washing program When using liquid detergents Loading the WashingAdding Detergent/Conditioner Starting the Washing Program Setting the Washing ProgramDuring the Washing Program Program Progress IndicatorChanging Settings Changing the Spin Speed/Selecting Rinse HoldWash Complete/Removing the Washing After a Rinse HoldOnce the Program is Finished Washing Program TablesPosition k Delicates Separate Spinning Separate SoakingSeparate Conditioning/Starching/Treatment Separate RinsingDetergent drawer Cleaning and CaringFill-in door Washing drumWhat to do when… Trouble ShootingDed feet are not correctly Vice who have a retrofit kit Washing is not spun If there are white remnants on the washing If the washing results are not satisfactoryIf there are still gray stains on the washing If at the end of the last rinse foam is still visiblePerform emergency drain When the water is completely drained Clean the circulating pumpPosition 2 Water Cooling and Additional Rinse Make the AdjustmentAdditional Rinse/Water Cooling Position 1 Water CoolingInstallation Safety Precautions Installation and Connection InstructionsDimensions of the appliance Front and Side ViewsRear View Transporting the appliance Installation of the applianceRemove transportation protection Prepare the installation place Installation on a concrete baseInstallation on vibrating floors Levelling on uneven floors Power supplyPermissible water pressure Water connectionWater feed Water drain-off inside a basin Water drain-offDelivery heights above 1m Water drain-off inside a siphonTechnical data Service Departments Pøípadì problému volejte zdarma 0800/16 00 Guarantee ConditionsIndex Guarantee . . . . . . . . . . . . . . . . . . . . . . . .6You will be charged even during the warranty period Service
Top Page Image Contents