Avanti TLW16W, TLW21PS Sink Faucet Connection, Disconnecting the Water Supply Hoses

Page 10

SINK FAUCET CONNECTION

For normal kitchen-sink tap only use the inlet hose with cold water inlet.

Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly. Make sure to insert the rubber ring enclosed. Then connect tightly to your sink.

Note: Some faucets may require you to also use the female hose thread adapter between the male adapter and your sink faucet as shown below. Make sure the rubber ring is inserted and connect to your sink.

If water leaks from faucet connection or washer connection, turn off water and tighten fully using a wrench. Be careful not to over tighten and damage water connection. Turn on water supply and make sure no leaks are present.

DISCONNECTING THE WATER SUPPLY HOSES

Dismantling the hose directly may cause water to splash due to the possible high water pressure in the hose, even after the faucet has been turned off. Please take off the hose as per following steps, even if the faucet is closed:

•Turn off the faucet.

•Turn on the power and let the machine run for about 5 seconds then turn it off.

•Remove the connecting nuts from the faucet and washing machine.

Note: If the washing machine is frequently used, it is not necessary to dismantle the inlet hose to avoid possible damage to the screws.

POSITIONING THE DRAIN HOSE

Since only up drainage is available, drain hose can be hung in the basin or bathtub.

NOTE: The highest point of the drain hose must be in the height of 2.25 – 4 feet above floor level, otherwise, the washer cannot work normally.

CONNECTING

NUT

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Numbers/ No. de Modelos Avanti Products LLC Box 520604 Miami, FloridaTable of Contents Appliance Safety Your safety and the safety of others are very importantImportant Safeguides Help US Help YOU If YOU Need ServiceRead this guide carefully Accessories Parts & FeaturesImportant Safety Instructions Before Using Your Portable Washer Selecting a LocationInstalling the Noise Damper Plate Connecting the Water Supply HosesSink Faucet Connection Disconnecting the Water Supply HosesPositioning the Drain Hose  Extension Cord  Electrical Connection Surge Protector 6 4 5 Preparation Operating Your Portable WasherBefore Washing Before Washing Press the Functions Selection Button Press the Power Button Press the Water Level ButtonWater Temperature Choice Manual Functions Selection Custom Washing CycleQuick Automatic Wash Programs Care and Maintenance Cleaning Your Portable WasherVacation time Problem Possible Cause Avanti Products Customer ServicesYour Avanti Products Warranty ADVERTENCIA Page Remover LA Plataforma a Prueba DE Ruido DE LA Caja Panel DE Control Hacia LA Derecha Instrucciones Para Operar LA Lavadora Encendido Power Nivel DE Agua Water LevelModo DE Empleo Preparacion Temperatura DEL AguaLimpiando EL Filtro DE Pelusas Mantenimiento DE InviernoPage Page Is This Product Used  Promote better productsHow Did You Learn About This Product TLW16/21/30 V1.0
Top Page Image Contents