SPIN ONLY (Approximately 8 minutes).
xPress down the power button.
xPress the cycle button to select the SPIN function until only SPIN indicator is ON.
xPress the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course.
AUTOMATIC WASH PROGRAMS
| Water Level | TimeWash /(MinSec) | RinseTime Minutes( ) | TimeSpin Minutes( ) | TimeTotal Cycle)(Full Minutes( ) | ||
Wash | Selection |
| |||||
|
|
|
|
| |||
Program | Default |
|
|
|
| ||
Range |
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
Heavy | 1 – 6 | 4 | 12 Min | 2 | 5 | 42 | |
QUICK | 1 – 3 | 3 | 2 Min | 1 | 30 Sec | 10 | |
30 Sec | |||||||
|
|
|
|
|
| ||
Normal | 1 – 6 | 4 | Wash 4Min | 1 | 7 | 39 | |
+Soak 13Min | |||||||
|
|
|
|
|
| ||
|
|
| Wash 3Min |
| 1 Min |
| |
Jeans | 1 – 6 | 4 | 40 Sec +Soak | 2 | 42 | ||
10 Sec | |||||||
|
|
| 13 Min |
|
| ||
1 – 6 | 4 | 11 Minutes | 2 | 00 | 34 | ||
30 Seconds | |||||||
|
|
|
|
|
| ||
Air dry | 1 – 6 | 4 | 0 | 0 | 57 | 60 | |
NOTE: All automatic wash programs include soak time.
To select one of the
Press the power button.
Press the program button to select the appropriate program until the indicator light is ON. (NORMAL is the default program)
Press the water temp button to select the water temperature. (The default setting is cold water). Press the water level button to select the appropriate water level setting. (The default water level is
4 water level)
Press the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course.
Close the lid, or the washing machine will buzz duringwash and spin cycle.
In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the washing machine to automatically refill with water to adjust the imbalance.
Note:
Clothes easily discolored should be washed separately so as to prevent
If you want to change a selected program, press the POWER button first to turn the unit off, then press the POWER button again to turn the unit back on,then press the Program button to select the new cycle before pushing START/PAUSE button.
When the Rinse and Spin functions are ON, do not use detergent.
If you want to drain the water during washing, press thePOWER button first to turn the unit off, then press the POWER button again to turn the unit back on,then select the SPIN function. Press START/PAUSE button again to restart.
16