Telefunken TTL-700 manual Preparation before washing Using process

Page 10

1 Preparation before washing Using process

Preparation before washing

1. Connect the water inlet hose.

2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3. Hang up the drain hose.

Pay attention to followings before washing the laundries

Confirm if there's special requirement for the laundries.

Clear the pocket. Take out the coins, sand, hairpins etc.

Fasten the buttons and zippers.

The quantity of the laundries shall not exceed the rated value. The big laundries like the jeans shall be put in loosely.

When the pulsator is running, the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries.

A. Check if the laundries are applicable for washing with the machine. B. For those desrepaired laundries,wash after mending.

C. Seperate the laundries with unfast color from other laundries.

D. Put those laundries difficult to absorb water into water with hand.

E. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, Please apply detergent in advance, which can make it easier to remove the soil.

F.For those laundries that may get lint ball and those with long fur, turn it over before putting in.

G.Do not put those laundries polluted by chemicals directly into the washing machine.

H.For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into

Mesh bag for washing.

81

Image 10
Contents Full Automatic Washing Machine Contents Names of the parts Safety precautions Petrol Special function introduction Before Using Installation and adjustmentUsage of the drain hose Before Using Dismantle the water inlet hose Preparation before washing Using process Put in the laundries Using process Reference weight of the laundriesAdd the detergent Close the top lidUse the operation buttons Using process Using process Push the Power ON/OFF button to switch on the power Selection method of the procedure programs Washing finished Confirm the reservation programDisposal after washing Trouble-shooting Answer to question Specification Packing list