Telefunken TTL-700 manual Safety precautions

Page 4
In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole
with carpet.The ventilation holes
at the bottom
soft items
Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating.

Safety precautions

Before Using

Please plug the plug on special 220V AC receptacle. Be sure to use threephase power receptacle. Ensure the earthing prong of the power receptacle is earth- ed reliably.Use a leakage protector if possible.

Earth

In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hang. Be sure to pull the plug off and close the water faucet when occurring power failure, delivering the machine, setting the machine idle or cleaning the machine, Do not plug or pull the power plug with wet hand.

Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent,or the customer care department to avoid any risk.Keep the prong of the power plug clean.If dust is found on the power plug, please wipe it off with dry cloth.

Do not use water with temperature higher than 50

Do not wash waterproof laundry like the raincoat, bikecovers, etc. To avoid abnormal

vibrations in spinning.

Do not let the machine share one receptacle with other electrical appliances. If the plugging into the receptacle is loose, do not use the plug any more.

21

Image 4
Contents Full Automatic Washing Machine Contents Names of the parts Safety precautions Petrol Special function introduction Before Using Installation and adjustmentUsage of the drain hose Before Using Dismantle the water inlet hose Preparation before washing Using process Put in the laundries Using process Reference weight of the laundriesAdd the detergent Close the top lidUse the operation buttons Using process Using process Push the Power ON/OFF button to switch on the power Selection method of the procedure programs Washing finished Confirm the reservation programDisposal after washing Trouble-shooting Answer to question Specification Packing list