Telefunken TTL-700 manual Using process

Page 14

Using process

POWER ON/OFF button

Press POWER ON/OFF button to connect power supply.

After power is connected, pressing this button will cut off the supply.

Numeral tube

To indicate -- during sensing.

To indicate remaining min. During program running.

To indicate remaining reserved time (hrs) during reservation period.

To indicate fault symbols for abnormal conditions (see page 17)

Page 17

START/PAUSE button

After the power is switched on, press it to start the machine

During working, push it to pause. During pause, push this button to restart and go on working.

SURPLUS(MIN)

RESERVE (HOURS LATER)

POWER

STARTON / OFF

PAUSE

+

Lock RESERVATION

Child safety lock program

RESERVATION button

Start up: The program is optional anytime after the machine hasbeen started. Push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety lock program works; all buttons are locked and cannot be selected.

Release: push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked.

Push the button to select the reserve washing time from 2 to 24 hours. Pressing the button, the numeral tube displays the reserved hours to the wash cycle end. The point light flashes to indicate in-reservation.

Remarks: After pressing POWER ON/OFF to connect power supply, if the washing machine lasts idle more than 10 min, it would automatically shut off the supply.

12

Image 14
Contents Full Automatic Washing Machine Contents Names of the parts Safety precautions Petrol Special function introduction Before Using Installation and adjustmentUsage of the drain hose Before Using Dismantle the water inlet hose Preparation before washing Using process Put in the laundries Using process Reference weight of the laundriesAdd the detergent Close the top lidUse the operation buttons Using process Using process Push the Power ON/OFF button to switch on the power Selection method of the procedure programs Washing finished Confirm the reservation programDisposal after washing Trouble-shooting Answer to question Specification Packing list