Installation Instructions
Complete the Installation
•Check to be sure all parts are now installed. If there’s an extra part, go back through the steps to see which step was skipped.
•Check to be sure you have all your tools.
•Dispose/recycle all packaging materials.
•Read this manual.
Final Installation Checklist
Instructions and Installation Kit have been re- moved from the tub.
Transit bolts/spacers have been removed.
Washer is plugged into electrical outlet and is properly grounded.
Water hoses are connected to the faucets with inlet screens and washers.
Water is turned on and checked for leaks at faucet and water valve connections.
Drain hose is properly located into drain facility and is not collapsed or damaged.
Washer has been leveled.
Test for proper operation (see below)
To test and clean the washer
Measure 1 to 2 tbsp. of powdered High Efficiency (HE) detergent.
• Pour the detergent into compartment 2 in the dispenser drawer (see Dispenser Drawer).
• Select program “4” on the PROGRAMS dial.
• Select HOT on the TEM- PERATURE knob
• Press the
!WARNING
ELECTRICAL SHOCK HAZARD
Plug
Do not remove ground prong. Do not use adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
IMPORTANT!
Should you move residence in the future, the Transit Screws/Spacers should be reinstalled to support the inside of the washer and prevent damage WHEN TRANSPORTING.
18