Splendide AW122 important safety instructions Washing Options, Option What it does How to set it

Start and Programs

Washing Options

Option

What it does...

How to set it...

Note

KNOBS	Changes the preset wash water	Rotate TEMPERATURE		• Rinse water is always
	temperature of the selected	knob to the desired wash
TEMPERATURE					COLD
	program	temperature
				•	Select	for No Spin
SPIN SPEED	Changes/excludes the preset	Rotate SPIN SPEED knob		•	Faster spinning will
	spin cycle of the selected				extract more water
		to the desired speed
	program				from highly absorbent
					fabrics
BUTTONS	Adds a one hour soak to the	Press		•	During soaking, laun-
Soaking
	selected washing program	SOAKING button (in)			dry is gently tumbled
				•	Recommended for
Extra Rinse	Adds one extra rinse to the	Press			very large loads, when
	selected Cotton Heavy Duty or				too much detergent is
		EXTRA RINSE button (in)
	Permanent Press program				used or for detergent
					contact allergies.
		Press		•	Prevents wrinkles
	Automatically stops the selected	EASY IRON button (in)			caused when laundry is
		Program will stop when it			not removed promptly
	Permanent Press or Hand
		reaches the symbol on			from the drum.
Easy Iron	Washables program before
		the Programs dial.		•	Use this option when
	the spin cycle begins. Laundry
					you know you won’t
	soaks in water until the Easy	To resume the program,
					be able to remove the
	Iron button is pressed again.
		Press EASY IRON button			laundry until long after
		again (out)			the cycle is finished.
	Adds an extra wash to the			•	Recommended for
Pre-Wash		Press			heavily soiled loads
	selected program
		PRE-WASHbutton (in)			like work clothes or
	(Not available in “Wool” cycle)
					children’s clothes.
On PROGRAMS Dial		1.	Rotate PROGRAMS dial
			clockwise and select 1h,	•	The On-Off lamp will
			3h, 9h, or 12h.		flash (1 second on, 4
DELAY TIMER	Delay’s the start of the	2. Press ON-OFFbutton (in).			seconds off) to indicate
		3.	Wait 5 seconds for the		a Delay Start has been
	washing program by 1, 3, 9 or 12
			ON-OFF light to stop		set. The door can be
	hours so laundry is ready when
			flashing.		opened or closed at
	you are.
		4.	Rotate the PROGRAMS		any time before the
			dial clockwise and select		cycle begins.
			a washing program.

Stop/Reset Cancels/Interrupts the selected program

1.	Rotate the PROGRAMS •	To cancel a program
	dial clockwise to a	completely, select
2.	Stop/Reset position.	(Drain). After the
	Wait 5 seconds.
		washer drains, wait for
3.	Rotate the PROGRAMS
		the DOOR LOCK light
	knob to the desired
		to extinguish before
	washing program or
	Drain (see right).	attempting to open the

door.

6