HOW TO USE COURSE AND PROCESS
OPERATION STATUS FOR THE COURSE
COURSE | Wash Time | Rinse Type and Rinse Times | Spin Time | |
(minutes) | (minutes) | |||
|
| |||
NORMAL | 5~12 | Water Saver Rinse 2 times | ||
HEAVY DUTY | 7~14 | Overflow Rinse 2 times | ||
|
|
|
| |
DELICATE | 6 | Overflow Rinse 2 times | 2 | |
BLANKET | 12 | Overflow Rinse 2 times | 8 | |
CUSTOM | 10 | Shower Rinse 1 times | 5 | |
Water Saver Rinse 1 times | ||||
|
|
|
●Possible the total time is not same due to different water pressure.
●Shower rinse could be changed as Water Saver Rinse. Please see Page 12 instructions SHOWER RINSE. 12
VARIOUS FUNCTIONS
PRESET
1.Press POWER ON/OFF button and make sure to fit the Drain Hose.
2.Turn the faucet on and load the laundry into the washer.
3.Select your needed COURSE, PROCESS and WATER LEVEL.
4.Press PROCESS button till light of PRESET flashes, press SET button select your needed preset time ( the time washing finished).
PRESET Indicate
6 
7
8 
……24 
0 
1……5(hours)
5.Press START/PAUSE button.
6.Put the detergent into the washer and close washer lid.
●All the lights except PRESET will be lighted off in about one minute later.
●Directly put the detergent into the tub. ( Do not make detergent touching clothes)
●PRESET confirming: Press SET button to indicate PROCESS about 5 seconds.
●PRESET cancel, change: PRESET is canceled automatically when power off; Switch power on and set PRESET again to change it.
●This function is not available for DELICATE course.
WATER LEVEL SETTING
This button allows you to choose the appropriate water level during WASH / RINSE process.
Method: Press PROCESS till WASH light flashes, press WATER LEVEL button to choose the appropriate water level, press SET button to set wash time. Then press PROCESS button till RINSE light flashes, press WATER LEVEL button to choose the appropriate water level, press SET button to set RINSE times and RINSE type. Then press PROCESS button till SPIN light flashes, press SET button to set SPIN time. Finally press START/PAUSE, the washer will start operating according to the wash water level and rinse water level as set.
11
VARIOUS FUNCTIONS
BLANKET
1.Press POWER ON/OFF button and make sure to fit the Drain Hose. 2.Press COURSE button continuously and choose the BLANKET course (The
BLANKET Light flashes).
3.After the detergent is dissolved with proper amount of warm water (approx. 30℃), pour it into the tub of the washing machine.
4.Fold up the blanket as the method showed in the figures below and put it into the washing tub.
5.Press the START/PAUSE button. 6.Close the washer lid.
1 | 2 | 3 | 4 |
Fold in two by the | Fold 4 times in the | Roll up the blanket. | Put it into the wash tub with |
long side | same direction |
| the edge downwards |
TWO CLEAN STEPS FUNCTION
The washer will start washing when water to the level below 2 levels as set. By this, the washer starts working with more density of detergent.
●This function won't be effected when select level 1 or level 2 water, and DELICATE or BLANKET program.
●When SOAK is selected, this function will not be effected after soaking.
CHILD LOCK FUNCTION
The Washer will stop working automatically and alarm if washer lid opened 5 seconds during operation.
Method of Child Lock Set: Press POWER ON/OFF button to switch on the power, press WATER LEVEL button for 4 seconds till Buzzer sounds. To restore it, repeat above or pull out the plug.
REMEMBER FUNCTION
When select NORMAL, CUSTOM or HEAVY DUTY, 30 seconds after starting, the washer will remember this program and starts same next time working.
●This function is not available for DELICATE and BLANKET course. ●PRESET ,SOAK and WATER LEVEL will not be remembered.
●The Wash, Rinse and Spin for CUSTOM program could be remembered. ●The memory will be lost if pull out the plug.
SHOWER RINSE
Under CUSTOM, if set 2 times rinses, the first rinse will be shower rinse. If you don't want shower rinse, you can cancel it and it will change to Water Saver Rinse or Overflow Rinse.
Method of use:
Press POWER ON/OFF button to switch on the power, and press SET button for 4 seconds till a sound from buzzer. To restore it, repeat above or pull out the plug.
12