Smeg 129316 manual Installation and connection, Removing wrapping, Selecting, Appropriate location

Page 6

Installation and connection

Removing wrapping

Packaging materials are environmentally friendly:

 

 

they can either be recycled, safely disposed of or

 

 

destroyed without any threat to the environment.

 

To be able to do this effectively all materials are

 

 

marked accordingly.

 

 

 

 

 

Be careful not to damage cabinet of the

 

 

appliance with a sharp object when

 

 

removing the packaging.

 

 

Before connecting the appliance, let it

 

 

warm up to room temperature (wait for two

 

 

hours).

 

Ventilation slots and openings on the appliance

Selecting the

appropriate location of

front and rear wall should not be obstructed.

the appliance

 

A - Evacuation dryer

 

 

 

Place the appliance in a well ventilated room with

 

 

a window or a built-in fan.

 

Connect the evacuation tube to the pre-prepared

 

 

opening.

 

Evacuation must not be connected to air duct

 

 

used as a chimney for exhaust gasses of

 

 

appliances using other combustion material.

B - Condensation dryer

Do not place the appliance in a room where there is danger of freezing.

Location should be adequately ventilated. Room temperature should always be between 0°C and 25°C since frozen water in the condensation container or in the pump may damage the dryer.

129316

6

Image 6
Contents Instructions for Use Tumble DryerTips for drying and for economic use Technical data Appliance descriptionTo reduce the fire hazard, always consider the following 129316 Selecting Installation and connectionRemoving wrapping Appropriate location129316 Moist air outlet 129316 filter alarm/water container alarm LED OperationLast Decreasing the temperature Operating the dryerHeater off Drying procedure Interruptions Water container is full Tips for drying and for economic use of the dryer Cleaning and maintenance Cleaning the filter Cleaning the condensation dryerCleaning of evacuation Cleaning the water Condensation deviceDrier 129316 Troubles Unevenly dried laundry Program chart TablesTable of textile symbols DryingSP PG1 OEM