Smeg 129316 manual Moist air outlet

Page 8

Moist air outlet

A - Evacuation dryer

 

There are two openings for the evacuation of

 

 

humid air. One of them should be closed with the

 

supplied lid, while the other should be connected

 

to the evacuation tube.

 

 

1Lid

2Evacuation tube

The distance between the dryer and the moist air outlet (ventilation shaft, window) should not exceed 2 meters, otherwise water can accumulate in the tube.

B - Condensation dryer

Moisture from laundry is extracted in the water condensation device and is either collected in the receptacle or discharged directly into the drain (drain height should not exceed 800mm).

The signal light indicates that the container is full and should be emptied, preferably after each drying cycle.

129316

8

Image 8
Contents Instructions for Use Tumble DryerTips for drying and for economic use Technical data Appliance descriptionTo reduce the fire hazard, always consider the following 129316 Installation and connection Removing wrappingSelecting Appropriate location129316 Moist air outlet 129316 Last filter alarm/water container alarm LEDOperation Heater off Decreasing the temperatureOperating the dryer Drying procedure Interruptions Water container is full Tips for drying and for economic use of the dryer Cleaning and maintenance Cleaning the filter Cleaning the condensation dryerDrier Cleaning of evacuationCleaning the water Condensation device 129316 Troubles Unevenly dried laundry Program chart TablesTable of textile symbols DryingSP PG1 OEM