Smeg LBS1600X manual Display LED, Led

Page 10

GB

AOpen door button

BON-OFF and washing and drying programme selection knob

CDelay timer shown on display LED – (only for models with this option)

DTime remaining shown on display LED

Press the button to open the door. Chapter 5 – Washing instructions – explains how the door works and how to use it.

This knob lets you:

switch the machine on and off by moving it in either direction from the OFF position (knob indicator vertical)

select washing temperatures within the various fabric sectors by turning it in both directions

select the drying programme

The knob does not rotate while the programme is running. The programme is electronically controlled by the machine.

This LED indicates that the display is showing the time selected for the delay timer.

This LED indicates that the display is showing the total duration of the selected programme before the programme starts, and the time remaining while the programme is running.

E

Spin speed shown on

This LED indicates that the display is showing the maximum

 

display LED

spin speed for the selected programme. It stays on while spin

 

 

speed is being selected with the relative button.

 

 

 

FDrying programme for normal garments shown on display LED

This LED indicates the selection of the normal drying programme (drying temperature 90°C – for resistant items, cottons).

GDrying programme for delicates shown on display

LED

This LED indicates the selection of the delicate drying programme (drying temperature 60°C – for synthetics, delicates).

H

Display

The display shows the following information:

 

 

1.

time remaining for the selected programme, given

 

 

 

in hours/minutes.

 

 

2.

delayed start (for models featuring this option).

 

 

 

Given in hours/minutes. When the time remaining

 

 

 

before the programme starts is less than 60 minutes,

 

 

 

this information is given in minutes/seconds.

 

 

3.

spin speed

 

 

4.

drying times given in hours/minutes

 

 

5.

cycle pause - flashing STOP

 

 

6.

end of cycle - END

 

 

7.

error codes

 

 

8.

automatic drying programme (Aut1 or Aut2)

 

 

 

 

10

Image 10
Contents Washer Dryer Contents NEW Washing System Safety Warnings Page = brown N = blue = yellow-green Unpacking Installation InstructionsPositioning and Levelling Drain Connection Water Supply ConnectionElectrical Connection Description of Controls Control PanelDisplay LED LEDOptions buttons Quick wash Button Page Detergent Tray Washing InstructionsPreparing the Washing Loading the Washing Opening the DoorAdding Detergent and Additives Dosing Liquid Detergents Dosing Powder DetergentsSCALE-REMOVERS Modifying Starting Parameters Wool programmeStarting the Washing Programme Interrupting or Changing the Washing ProgrammeEND of Programme END of Programme BeeperGeneral Information Using the Machine for Drying PurposesAutomatic Drying DRY-ONLY Programme Timed DryingWASH-DRY Programme Interruption or Change of Drying ProgrammeCleaning the Drum Cleaning and MaintenanceExternal Cleaning Cleaning the Door GasketCleaning the Detergent Tray Cleaning the Water Inlet Filter Troubleshooting Error Signals Control Panel Symbols Programs Options Other Symbols