Smeg LBS1600X manual Using the Machine for Drying Purposes, General Information, Automatic Drying

Page 19

GB

6. USING THE MACHINE FOR DRYING PURPOSES

6.1 GENERAL INFORMATION

During drying cycles it is essential that the water tap is open and that the drain hose is correctly positioned.

With this machine it is possible to set wash-only programmes, dry-only programmes and wash-dry programmes. For the latter programmes, the cycle shifts automatically from washing to drying without the controls being touched and the cycle continues after washing.

Warnings

Only dry linen or garments washed in a water-based solution and suitable for tumble drying.

The quantity of washing that can be introduced into the washer dryer for drying must not exceed 2.5kg. This washer dryer has been built to offer maximum performance with dry loads weighing not more than 2.5 kg.

When intensive washing programmes are set, drying is automatically performed at 90°C (normal drying).

For delicate programmes, drying is automatically performed at 60°C (delicate drying). Therefore, for an automatic washing programme plus drying, the drying programme is dictated by the washing programme selected.

In order to carry out a dry-only programme, the linen must already have been washed and spun.

After drying particularly soft linen, e.g. new towelling underwear, it is advisable to carry out the “Rinse” programme in order to ensure that any small fabric deposits are drained away and are not deposited on the linen in the next wash load.

Important – do not dry delicate fabrics that cannot withstand temperatures of 60°C or in any case fabrics that cannot withstand the selected temperatures.

6.1.1TABLE OF APPROXIMATE DRYING TIMES AND TEMPERATURES

Weight of

Resistant fabric

Delicate fabric

Drying

washing

drying at 90°

drying at 60°

result

 

 

 

 

1,5kg

40 minutes

80 minutes

Damp for ironing

 

 

 

 

 

80 minutes

100 minutes

Dry

 

 

 

 

2.5kg

80 minutes

120 minutes

Damp for ironing

 

 

 

 

 

100 minutes

-

Dry

 

 

 

 

6.1.2EXTRA DRYING

If the washing is still too wet when the programme finishes, set a short timed drying cycle.

Caution! Do not dry garments too much as they may crease or shrink.

6.2 AUTOMATIC DRYING

During the drying cycle, the sensor senses the residual humidity. The length of drying time is adjusted according to the weight and type of washing. During the drying cycle the display shows the variations in the length of drying time. With automatic drying it is possible to select 2 levels of residual humidity at the end of drying.

Aut1

Normal dry – suitable for thinner and normal fabrics.

 

Weight: 1.5 – 2.5kg

 

 

Aut2

Extra dry – suitable for thicker, heaver fabrics.

 

 

 

Weight: 1.5 – 2.5kg

 

 

6.2.1 Display messages if the weight is not appropriate

 

 

LO

Weight is too low – the programme stops after 44 minutes in order to avoid ruining the washing.

HI

Weight is too high – the programme carries out the drying for a maximum of the following times:

 

 

 

 

 

 

 

 

 

 

Normal drying programme

 

Delicate drying programme

 

 

 

 

(length in hrs and mins)

 

(length in hrs and mins)

 

 

 

Aut1

1:50

 

1:50

 

 

 

Aut2

2:30

 

2:00

 

19

Image 19
Contents Washer Dryer Contents NEW Washing System Safety Warnings Page = brown N = blue = yellow-green Unpacking Installation InstructionsPositioning and Levelling Drain Connection Water Supply ConnectionElectrical Connection Control Panel Description of ControlsLED Display LEDOptions buttons Quick wash Button Page Detergent Tray Washing InstructionsPreparing the Washing Loading the Washing Opening the DoorAdding Detergent and Additives Dosing Liquid Detergents Dosing Powder DetergentsSCALE-REMOVERS Wool programme Modifying Starting ParametersInterrupting or Changing the Washing Programme Starting the Washing ProgrammeEND of Programme Beeper END of ProgrammeGeneral Information Using the Machine for Drying PurposesAutomatic Drying Interruption or Change of Drying Programme Timed DryingWASH-DRY Programme DRY-ONLY ProgrammeCleaning the Door Gasket Cleaning and MaintenanceExternal Cleaning Cleaning the DrumCleaning the Detergent Tray Cleaning the Water Inlet Filter Troubleshooting Error Signals Programs Options Other Symbols Control Panel Symbols